Universal Machinery Sales
Dismantlers, chop and trim saws, and collated nailers from jigs to in-line systems.
The name identifies the machines. We are not Universal Machinery Sales and do not sell for them.
Models you see used

Universal Mark I / Run-A-Gade
- Kind
- Bandsaw dismantlers
- Specs
- Mark I: 10 HP single- or three-phase, 62 in table; Run-A-Gade: 15 HP
- Output
- Mark I 400 to 700 an 8-hour shift, maker’s claim
- Source
- Pallet Enterprise dismantler guide, July 2025

Universal Trio / Solo
- Kind
- Disc (shear) dismantlers
- Specs
- Trio: 3 heads, 15 HP, pallets up to 54 x 62; Solo: single head
- Output
- Trio 800 to 1,000 an 8-hour shift, maker’s claim
- Source
- Pallet Enterprise dismantler guide, July 2025

Universal chop saws and Robo-Chop
- Kind
- Chop and cut-off saws
- Specs
- 14, 18 and 22 in manual and conveyor saws; super chops to 26 in; gas option
- Output
- Robo-Chop about 2 seconds a cycle, maker’s claim
- Source
- Pallet Enterprise trim saw guide, April 2024

Universal Trim-Trac, hopper-feed double end-trim
- Kind
- Trim saws
- Specs
- Trim-Trac 16 to 56 in; hopper feed 20 to 60 in with 10 in blades
- Output
- 47 to 50 boards a minute (hopper feed), maker’s claim
- Source
- Pallet Enterprise trim saw guide, April 2024

Universal In-Line / Nail Mate
- Kind
- Collated nailers
- Specs
- In-Line: fully automatic, 84 x 64 standard; Nail Mate: semi-automatic, 50 x 56
- Source
- Pallet Enterprise nailing machine guide, July 2020
Photographs show the kind of machine, not the model or a machine we hold. Where the maker publishes no output figure for a model, we leave that line out rather than guess.
Buying or selling a used Universal Machinery Sales
Universal Machinery Sales has a machine for most stations in a small shop, and many of its machines are made for people starting out. The Mark I bandsaw dismantler comes with a 10 HP single- or three-phase motor and is rated by the maker at 400 to 700 pallets a shift for one man. The Trio is a three-head disc machine rated at 800 to 1,000.
On the saw side there are manual chop saws from 14 inches, an 18 inch saw with a single-phase motor available, a 22 inch conveyor saw with a gas option, and trim saws up to the hopper-feed double end-trim. On the nailing side, the Nail Ease, Nailing Station and Revo jigs are for short runs or start-ups, the Nail Mate is semi-automatic and the In-Line is a fully automatic three- or four-stringer system.
Used In-Line and Nail Mate II machines were on a dealer’s list in November 2026 with Request Price, both removed from service.
Universal is unusual in covering both ends of a small shop: dismantlers and saws for recovering boards, and collated nailing jigs and in-line machines for building with them. A start-up that bought a Mark I and a chop saw from the same maker can add a Nail Mate later, and used Universal machines tend to come up in those combinations when a shop changes direction.
Selling a Universal machine? Send the model and its plate, the motor and phase (several offer single-phase), the blade size on a saw and the fixtures on a nailer.
The Robo-Chop is Universal’s automatic cut-off saw, about two seconds a cycle by the maker’s figure, and the hopper-feed double end-trim saw is rated at 47 to 50 boards a minute. Both suit a shop that has outgrown hand-fed chop saws but not yet needs a multi-head trimmer.