Used machines for pallet shops, by make and model.

Find me a machine
Menu
A machine assembling block pallets with blocks set in a jig under pneumatic nailing heads

Block pallet nailing machines

A block pallet sits on nine blocks instead of stringers, so the machine that builds it has to hold blocks in place, nail the stringer boards across them, then nail the deck. Many stringer nailers cannot do that at all; the ones that can are listed by the trade guide as block and stringer machines, or as dedicated block lines.

Machines the guides list for block pallets
Maker and modelKindPowerSize and capacityMaker’s output claim
GBN Excalibur IIBulk, high-production blockBlock pallets[1]
GBN Patriot (block and stringer)BulkAir clamp fixture for blocksBlock and stringer[1]
CAPE MACH seriesBulkMinimum set-up timesBlock and stringer[1]
Bronco Mustang 4000Collated, one operatorCoils of 3,000 nailsBlock and stringer[1]
RT Pallet Equipment Third ManCollated jig with stackerFully pneumatic, no electricBlock and stringer[1]
Pallet Chief Block Pallet SystemBlock36 x 30 to 48 x 48 in standard[2]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Pallet Enterprise nailing machine guide, July 2020, read Nov 15, 2026
  2. Pallet Chief's own machine pages, read Nov 15, 2026

Prices

How it differs from a stringer nailer

A stringer machine lays stringers in a fixture and nails boards across them. A block machine has to locate nine blocks, often with a clamp, and builds in more layers: bottom boards, blocks, stringer boards, top deck. Some machines do both with a change of fixture, like GBN’s Patriot with its air clamp system; others are dedicated block lines.

Block pallets are the 4-way pallets that export and retail customers often specify. If you build stringer pallets now and are adding block pallets, ask whether your existing machine has a block fixture before you buy a second machine.

What to ask before buying one used

The sizes it was set up for, and whether the block fixtures for each size come with it. The fastener, because block pallets take more nails per pallet and the bulk or collated cost difference grows. The block feed, if it has one, and the clamps.

RT’s Third Man jigs run fully on air, which suits a shop without three-phase. Tell us the block pallet sizes you build and how many a day, and we will look. Stringer machines are on the nailing machine page.

Block pallets and the buyer

Block pallets are what many export and pooled-pallet customers specify, with blocks between the deck boards instead of full-length stringers so forks enter from all four sides. A shop that adds a block nailer is usually chasing a specific customer. If you are buying, get the pallet specification from that customer first and ask the seller whether the machine has built it.

Some stringer machines take a block fixture; ask the maker or the seller whether yours does before buying a second machine. Blocks may be solid wood or composite, and the fixture differs for each. European customers often want EPAL-style dimensions; confirm what your buyer needs.