Used machines for pallet shops, by make and model.

Find me a machine
Menu
A notcher cutter head with rows of carbide insert teeth next to a notched stringer

Pallet notcher heads

A notcher head is the round cutter body that carries the teeth or inserts and cuts the arched fork notch into a stringer, one head per notch on the machine. Heads are matched to the machine’s arbor and to the notch profile, so the maker, model and the notch size you cut are what we need to find one.

Notchers and what the listings say about their heads
Maker and modelHeadsPowerNotch and cuttersOutput, as claimed
Cam-Wood 1AM-1180-GSingle head, gas13 HP9 x 3 x 3 in notch; 40 insert-tip cutters[1]
Cam-Wood 1AM-1150, 1AM-1180Single head10 HP[1]
Cam-Wood 1AM-1250Double head10 HP, three-phaseTwo heads[1]
Go Fast 2NXDouble headTwo heads[1]
Baker BN-O BantamSingle head[1]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026

Prices

We do not show head prices: none were published where we read.

When a head needs replacing

Re-tip or replace teeth first; a head body lasts much longer than its cutting edges. Replace the head when the seats that hold the inserts are worn or cracked, when the bore is worn on the arbor, or when it has been out of balance since it hit a nail. A head that vibrates, burns the notch or leaves a ragged edge with fresh teeth is telling you.

Measure the notch the head cuts: width, depth and the rise of the arch. The Cam-Wood gas notcher listing gives 9 by 3 by 3 inches. If you are changing notch size for a customer, you need a different head, not new teeth.

What to send us

The notcher’s maker, model and year, the head’s bore and outside diameter, the notch size, the number of teeth or inserts, and a photo of the head on the bench. For a double head machine, say whether you need one head or a matched pair.

Teeth on their own are on the teeth page; the machines are on the notcher page.

Buying a head with a used notcher

A spare head that comes with a used notcher is worth asking for. Swapping heads lets the shop keep notching while the worn one is re-tipped, and an unused head is easy to sell on if you change machines. Ask whether the spare fits that model exactly; heads that look alike may differ in bore and keyway.

Heads differ by bore, keyway, diameter and the number and style of inserts. Measure all four before you order, and note the notch size the head cuts, such as the 9 x 3 x 3 inch notch listed for the Cam-Wood 1AM-1180-G.

Keep the worn head when you buy a new one. Many can be re-tipped, which costs less than a new head, and a spare lets you swap in minutes. Balance matters: an unbalanced head shakes bearings loose and leaves rough, chattered notches. Keep records of hours run per head. Grinding services restore carbide quickly.