
Pallet nailing machines
A pallet nailing machine holds the stringers or blocks in a fixture and drives the deck-board nails for you, from a jig with hand-fired guns to a tandem line with board feeders and a stacker. The first split is the fastener: bulk machines drive loose nails and cost more to buy but less to feed, collated machines fire coil or strip nails from pneumatic tools and cost less to buy but more to feed.
| Maker and model | Kind | Power | Size and capacity | Maker’s output claim |
|---|---|---|---|---|
| Viking Turbo 606 | Bulk, tandem, stringer | Three operators | Quick changeover | upwards of 2,000 a shift[1] |
| Viking Turbo 505 | Bulk, stringer | Three operators | Stringer pallets | 1,800-plus a shift[1] |
| Viking Express 403 | Bulk, tandem | Two operators | Stringer pallets | 1,300 a shift[1] |
| Viking Champion QC306 | Bulk | One operator | Recycled and low-grade lumber | 500 to 600 a shift[1] |
| Viper Woody | Collated, stringer | One operator | Stringer pallets | up to 600 a shift[1] |
| Rayco Pallet Pro | Collated, stringer | One or two operators | 20 to 30 second cycle, stacker | [1] |
| Universal In-Line | Collated, 3 or 4 stringers | Fully automatic | 84 x 64 standard | [1] |
| Bronco Mustang 4000 | Collated, block and stringer | One operator | Coils of 3,000 nails | [1] |
| Pallet Chief IV Deluxe Stacker | Collated or large coils | Two nailing stations, flipper | 34 to 48 in, 3 to 4 in stringers | 3 a minute in a listing[2] |
A dash means the maker’s page or the listing gave no figure for that column.
Output figures are the makers’ own claims as the source prints them, not our measurements.
- Pallet Enterprise nailing machine guide, July 2020, read Nov 15, 2026
- Surplus Record listing, Pallet Chief IV Deluxe Stacker, read Nov 15, 2026
Published asks
| Maker and model | Machine | Year and condition | Listed from | Ask |
|---|---|---|---|---|
| Pallet Chief IV Deluxe Stacker | Stringer pallet nailer with stacker, 3 pallets a minute in the listing | 2023, used | Uxbridge, ON, Surplus Record | $50,000 |
Asks, not sales: what each seller listed when we read the page on 15 Nov 2026. We are not the seller of these machines, and a listed machine may since have sold.
Bulk or collated
Pallet Enterprise’s guide puts it simply: bulk-fastener machines cost more to buy and use cheaper nails; collated machines cost less to buy and their nails cost more. Viking, CAPE, Corali, GBN and the Storti lines are bulk; Bronco, Rayco, Universal, Viper, Woodpecker and RT’s jigs are collated. Our bulk or collated guide works through the choice by volume.
Then the pallet. Most of these build stringer pallets; block pallets need a machine that holds blocks, and only some do. See block pallet nailers.
What to check on a used nailer
On a collated machine, the guns: count them, ask for their make and series, look at the drivers and the magazines, and ask when they were last rebuilt. On a bulk machine, the nail feeders, the drivers and the hydraulics. On both, run a pallet and look at the nail lines and the squareness of what comes out, then work the flipper and the stacker.
Ask which pallet sizes it is set up for and what it takes to change over. A machine fixtured for 48 x 40 only may need parts to build anything else. Ask for the controls too: the PLC model, a backup of its program and the manuals. The used nailer checklist has the full list.
Fixtures and sizes
A nailer builds the pallets its fixtures are set up for. A used machine that built one customer’s 48 x 40 for years may need new fixtures, plates or stops to build your sizes, and that tooling can cost real money. Ask the seller for every fixture that comes with it and the sizes each one builds.