
Pallet notchers
A pallet notcher cuts the fork-entry notches into stringers, which turns a 2-way stringer pallet into a partial 4-way one that a pallet jack or forklift can take from the side. Single head machines cut one notch a pass, double and triple head machines cut two or three, and they run on electric motors or, on some models, gasoline.
| Maker and model | Kind | Power | Size and capacity | Maker’s output claim |
|---|---|---|---|---|
| Cam-Wood 1AM-1150 | Single head | 10 HP | Stringer notcher | [1] |
| Cam-Wood 1AM-1180 | Single head | 10 HP | Stringer notcher | [1] |
| Cam-Wood 1AM-1180-G | Single head, gasoline | 13 HP gas | 9 x 3 x 3 in notch, 40 insert-tip cutters | [1] |
| Baker BN-O Bantam | Single head | Stringer notcher | [1] | |
| Cam-Wood 1AM-1250 | Double head | 10 HP, three-phase | Stringer notcher | [1] |
| Go Fast 2NX | Double head | Stringer notcher | [1] |
A dash means the maker’s page or the listing gave no figure for that column.
Output figures are the makers’ own claims as the source prints them, not our measurements.
- Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026
Published asks
| Maker and model | Machine | Year and condition | Listed from | Ask |
|---|---|---|---|---|
| Cam-Wood 1AM-1150 | Single head pallet notcher, 10 HP | 2026, new | Charlotte, NC, Surplus Record | $5,985 |
| Baker single head | Single head pallet notcher | 2024, used | Uxbridge, ON, Surplus Record | $7,252 |
| Cam-Wood 1AM-1250 | Double head pallet notcher, 10 HP, three-phase | 2026 | Charlotte, NC, Surplus Record | $15,300 |
| Go Fast 2NX | Double head pallet notcher | 2025 | Uxbridge, ON, Surplus Record | $18,129 |
Asks, not sales: what each seller listed when we read the page on 15 Nov 2026. We are not the seller of these machines, and a listed machine may since have sold.
Single, double or triple head
A single head notcher cuts one notch, so a stringer goes through twice. It is the cheaper machine and the usual first notcher for a recycler who notches a few hundred stringers a day. A double head cuts both notches in one pass and roughly halves the handling; triple head machines exist for the busiest new-pallet plants.
The asks we found show the gap: Cam-Wood single head machines listed at $5,985 to $7,450 new, against $15,300 for Cam-Wood’s double head and $18,129 for a 2025 Go Fast 2NX.
What to check on a used notcher
The heads and teeth are the wear parts. Look at the carbide or insert tips for chips, ask when the head was last re-tipped, and see whether spare inserts come with it. Run a stringer through and check that the notch is clean, square and the same depth on both ends.
Then the feed, the fences and the clamps, and the motor or engine. Gas models such as the Cam-Wood 1AM-1180-G suit shops without three-phase. Heads and teeth are on the notcher heads and teeth pages.
Notchers and the customer
Whether you need a notcher at all depends on your customers. Partial 4-way stringer pallets, with fork notches in the stringers, are what many warehouses specify, and a recycler whose customers ask for them either notches or loses the order. A shop rebuilding plain 2-way pallets can wait. Ask your three biggest customers what they take before you buy one. Triple head machines exist for high-volume builders, but they are rarely seen used.