Used machines for pallet shops, by make and model.

Find me a machine
Menu

Smart Products

Bandsaw dismantlers for one or two operators, portable dismantlers and trim saws.

The name identifies the machines. We are not Smart Products and do not sell for them.

Models you see used

Bandsaw dismantler, the kind of machine the Smart Products one-operator dismantler is

Smart Products one-operator dismantler

Kind
Bandsaw dismantler
Specs
10 or 15 HP electric; 2,600 or 3,700 ft/min; 52 or 64 in base
Output
600 pallets an 8-hour shift; blade life 1,200 to 1,500 pallets, maker’s claim
Source
Pallet Enterprise dismantler guide, July 2025
Bandsaw dismantler, the kind of machine the Smart Products two-operator dismantler is

Smart Products two-operator dismantler

Kind
Bandsaw dismantler
Specs
52 or 64 in base, power options like the one-operator
Source
Pallet Enterprise dismantler guide, July 2025
Dismantler with conveyor and trim saw, the kind of machine the Smart Products Pallet Dismantler System (PDS) is

Smart Products Pallet Dismantler System (PDS)

Kind
Dismantler with conveyor and trim saw
Specs
Front discharge onto a 17 ft accumulating chain conveyor
Output
over 1,000 pallets an 8-hour shift, maker’s claim
Source
Pallet Enterprise dismantler guide, July 2025
Towable bandsaw dismantler, the kind of machine the Smart Products portable dismantler is

Smart Products portable dismantler

Kind
Towable bandsaw dismantler
Specs
Gasoline, electric start; 52 or 64 in; normally 2-person
Output
700 to 800 pallets an 8-hour shift, maker’s claim
Source
Pallet Enterprise dismantler guide, July 2025
Trim saw, the kind of machine the Smart Products single-end power feed trim saw is

Smart Products single-end power feed trim saw

Kind
Trim saw
Specs
18 in nail-cutting blade, 10 HP three-phase (single-phase optional), 18 to 60 in boards
Output
15,000 boards an 8-hour shift, maker’s claim
Source
Pallet Enterprise trim saw guide, April 2024

Photographs show the kind of machine, not the model or a machine we hold. Where the maker publishes no output figure for a model, we leave that line out rather than guess.

Buying or selling a used Smart Products

Smart Products builds for the recycler’s floor: dismantlers by crew size, a portable machine on gasoline, and the trim saws that sit beside them. Its one-operator bandsaw is rated by the maker at 600 pallets an 8-hour shift with a stated blade life of 1,200 to 1,500 pallets, and its Pallet Dismantler System, a front-discharge dismantler feeding a 17 foot accumulating conveyor and a trim saw, at over 1,000.

The portable dismantler is towable and runs on gasoline with electric start; the maker says it is normally run by two people at 700 to 800 pallets a shift. That makes it one of the few dismantlers a shop can take to a customer’s pile.

On a used Smart Products dismantler, check the hydraulic blade tensioning, the blade guide bearings and the push-button table height adjustment. On the trim saw, the 10 HP motor’s phase and the chain feed.

Smart Products builds for recyclers at both ends of the size range: portable gas dismantlers for start-ups and yards with no power, and dismantler systems with conveyors and a trim saw for shops processing over a thousand pallets a shift by the maker’s figure. That spread means a used Smart Products machine can suit almost any recycler, as long as the power and the floor fit.

If you are selling one, send the model or system name, the motor or engine, whether it is one-operator or two-operator, the blade length, and photos of the tensioner and the guide bearings.

The portable dismantler deserves a word of its own. Towable on its own trailer and gas-powered, it goes to the cores instead of the cores coming to it, and the maker rates it at 700 to 800 pallets an 8-hour shift, normally with two people. That suits yards with piles but no building, and contractors clearing old pallet piles for site owners. Hydraulic tensioning, push-button table height and two-operator layouts are details buyers ask about. Portable units need tire, axle, hitch and light checks before road use. Ask for brochures. Request the serial plate photo.

The same machines from other makers

Dismantlers
Cam-Wood, PRS, Industrial Resources, Universal Machinery Sales, Bronco, Alliance Automation
Trim and chop saws
Go Fast, Baker, PRS, Industrial Resources, Universal Machinery Sales, Pendu, Alliance Automation