Used machines for pallet shops, by make and model.

Find me a machine
Menu
A bandsaw dismantler with a powered outfeed conveyor carrying freed boards to a sorting table

Pallet recycling equipment

Pallet recycling equipment is the set of machines that turns broken and unwanted pallets into rebuilt pallets, recovered lumber and ground wood: a dismantler, a trim or chop saw, repair tables, a notcher, a nailer and, for the scrap, a grinder. Shops add them roughly in that order, as the volume of cores coming in grows.

The line, machine by machine, with an example the guides name
StepWhat it doesFor exampleSizeMaker’s output claim
DismantlerTakes pallets aparte.g. Wood-Mizer PD200, 10 HP or 19 HP gas60 to 96 in tableabout 400 a shift[1]
Trim or chop sawSquares recovered boardse.g. Wood-Mizer PC200, 18 in blade21 to 66 in boardsup to 12,000 boards a shift[2]
Repair tableBoard replacemente.g. PRS Econo, 3/8 in steel top48 x 54 in[3]
NotcherFork notches in stringerse.g. Cam-Wood 1AM-1180-G, 13 HP gas9 x 3 x 3 in notch[4]
NailerBuilds rebuilt or new palletse.g. Viking Champion QC306Recycled lumber500 to 600 a shift[5]
Grinder or shredderTurns scrap into fibere.g. Cresswood XR500Small footprint3,000 to 5,000 lb an hour[6]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Pallet Enterprise dismantler guide, July 2025, read Nov 15, 2026
  2. Pallet Enterprise trim saw guide, April 2024, read Nov 15, 2026
  3. Pallet Enterprise on the PRS Econo and Ergo tables, June 2013, read Nov 15, 2026
  4. Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026
  5. Pallet Enterprise nailing machine guide, July 2020, read Nov 15, 2026
  6. Pallet Enterprise grinding and shredding guide, March 2026, read Nov 15, 2026

Prices

In the order most shops buy

The dismantler comes first because it is what turns free or cheap cores into lumber. The trim saw or a chop saw comes with it, because recovered boards need squaring before they can be used. Then repair tables, because many cores need a board or two rather than taking apart.

A notcher comes when customers want 4-way stringers, a nailer when hand nailing at the tables stops keeping up, and a grinder or shredder when the scrap pile costs more to haul away than a machine costs to run.

Planning yours

The order changes with the work. A shop that only repairs may never buy a dismantler; a mulch yard may buy only a grinder. Our Start-up Line Planner takes the work you do, your pallets a day and your power, and lists the machines in buying order with the makers’ output beside your count and any published asks we hold.

If you are selling a whole line, see selling a shop’s worth of machines.

Selling a line

List each machine on its own line; see closing a shop.