Used machines for pallet shops, by make and model.

Find me a machine
Menu
A round notcher cutter head with carbide insert teeth beside a notched stringer

Single head pallet notchers

A single head notcher cuts one fork notch at a time, so each stringer passes through the head twice to get both notches. It is the smaller, cheaper notcher, and the published asks we found for new Cam-Wood single head machines run from $5,985 to $7,450.

Single head notchers in published listings
Maker and modelKindPowerSize and capacityMaker’s output claim
Cam-Wood 1AM-1150Single head10 HP electricStringer notcher[1]
Cam-Wood 1AM-1180Single head10 HP electricStringer notcher[1]
Cam-Wood 1AM-1180-GSingle head13 HP gasoline9 x 3 x 3 in notch[1]
Baker BN-O BantamSingle headListed 2021[1]
Baker single headSingle head, usedListed 2024[1]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026

Published asks

Single head notchers: asking prices as listed
Maker and modelMachineYear and conditionListed fromAsk
Cam-Wood 1AM-1180Single head pallet notcher, 10 HP2026, newCharlotte, NC, Surplus Record$7,450
Cam-Wood 1AM-1180-GGasoline single head notcher, 9 x 3 x 3 in notch2026Charlotte, NC, Surplus Record$7,450
Cam-Wood 1AM-1180-GGasoline single head notcher, 13 HP, 40 insert-tip cuttersYear and condition not listedCharlotte, NC, Surplus Record$6,250
Baker single headSingle head pallet notcher2024, usedUxbridge, ON, Surplus Record$7,252

Asks, not sales: what each seller listed when we read the page on 15 Nov 2026. We are not the seller of these machines, and a listed machine may since have sold.

When one head is enough

If you notch stringers for repairs and a modest run of rebuilt pallets, two passes on a single head is fine. The machine is lighter, easier to move into a small building, and the gasoline Cam-Wood means it can run where there is no three-phase. When notching becomes the bottleneck in front of the nailer, shops move to a double head.

The Cam-Wood 1AM-1180-G listing gives a 9 x 3 x 3 inch notch and 40 insert-tip cutters. Notch size matters: check that it matches the stringer height and fork opening your customers expect.

The parts that wear

The head and its teeth. Indexable insert tips can be turned or replaced; brazed carbide heads go back for re-tipping. On a used machine, ask how many spare inserts come with it, look at the head’s seats for damage, and check the arbor bearing for play. The teeth page says what to measure before you order.

Also check the stringer clamp, the stops and the guard. A notcher throws chips hard; the guard and the dust hood should both be there.

Gas or electric single heads

Cam-Wood offers its 1AM-1180 single head on a 13 HP gasoline engine as well as a 10 HP electric motor, and the gas version is listed at the same $7,450 as the electric. For a shop without three-phase, that is the straightforward way to notch in house. On a used gas notcher, check the engine hours and the belt drive to the head as well as the head itself. Used single heads hold their value because they are simple, so expect asks close to new for one in good order.