Used machines for pallet shops, by make and model.

Find me a machine
Menu
A green bandsaw pallet dismantler with a pallet half taken apart on its table and nail-studded deck boards on the floor

Used pallet equipment and machinery, bought and sold for pallet shops

Used machines for pallet shops, bought and sold by make and model. Dismantlers, notchers, nailers, trim saws, grinders and kilns, each written up by maker #model, power and year, the way the trade lists them.

Find me a machineSell my machine

Cam-Wood #1AM-010-2G$8,925

Gasoline bandsaw dismantler · 13 HP · 60 x 48 in table · new 2026

Asking, listed from Charlotte, NC on Surplus Record, read 15 Nov 2026. A published ask, not our price.

Machines by the job they do

A pallet shop is a line of jobs. Find the job, then the machine, then the maker and model.

Stringers with fresh fork notches stacked beside a notcher

Cut and notch

Square the boards, cut stock, notch the stringers.

A steel pallet repair table with a nail gun hanging on a balancer

Repair

Put a board or two back and the pallet goes out again.

Broken pallets dropping into a low-speed shredder hopper

Grind

Turn the scrap pile into mulch, bedding or fuel, and pull the tramp metal out.

Pallets stacked inside an open heat-treating kiln

Heat-treat

Kilns for the ISPM 15 stamp on export pallets.

Published asks

Most used pallet machines are listed as Request Price. These are the ones we read with a number on them, with where and when. We never show our own prices, and we never show a figure we have not read in a listing.

Pallet machines listed with a price, read 15 Nov 2026
Maker and modelMachineYear and conditionListed fromAsk
Wood-Mizer pallet dismantlerBandsaw pallet dismantler, listed as barely usedusedUxbridge, ON, Surplus Record$10,878
Brewco pallet sawPallet saw, 167 in conveyor, 30 HP, three-phaseYear and condition not listedEuclid, OH, Surplus Record$2,719
Cam-Wood 1AM-1180-GGasoline single head notcher, 13 HP, 40 insert-tip cuttersYear and condition not listedCharlotte, NC, Surplus Record$6,250
Go Fast 2NXDouble head pallet notcher2025Uxbridge, ON, Surplus Record$18,129
Baker ABXSingle head band resaw, 95 FPM feed2026, newCharlotte, NC, Surplus Record$25,145
Pallet Chief IV Deluxe StackerStringer pallet nailer with stacker, bought new in 20232023, usedUxbridge, ON, Surplus Record$50,762

Asks, not sales: what each seller listed when we read the page on 15 Nov 2026. We are not the seller of these machines, and a listed machine may since have sold.

Selling a machine

Used pallet machines are scarce, so the seller is half of this business. A dismantler idle since you added a second line, a notcher you replaced with a double head, a whole shop you are closing: send it, and we put it in front of shops asking for that machine.

Sell my machine How we place a machine

What we need from you

  • Maker and modelFrom the nameplate
  • YearOr best guess
  • PowerSingle-phase, three-phase, gas, air
  • Where it standsCity and ZIP
  • Running or notLast used when
  • PhotosWhen you have them

Starting a shop

A new recycling shop usually starts with these machines. Single-phase power changes the list: a gas bandsaw dismantler or a leverage dismantler on shop air instead of a 15 HP three-phase machine.

Open the Start-up Line Planner

Before you buy used

A dismantler

Look at the blade guides, the wheel bearings and how the table raises before the paint. Ask what blade it runs, how long one lasts, and how fast it runs in SFPM. The full checklist

A nailer

Ask whether it shoots bulk fastener or collated fastener, which pallet sizes it has fixtures for, and whether the controls still have their software. The full checklist

A grinder

Hours on the engine and since the rotor was rebuilt, the screens that come with it, and how it handles tramp metal from nail-heavy feed. What to ask a seller

Used machines are sold as-is. Everything you check before you pay is everything you know.

Blades and wear parts

The parts that wear are the band on a dismantler, the head and teeth on a notcher, and the drivers on a nailer. Send the nameplate and a photo of the worn part, and say how many you go through.

Ask about a machine

Buying or selling, tell us the machine and where it is. The more of the stock line you give us (maker, model, power, year), the faster we can answer.

What do you need?
Add maker, model and power (optional)

We reply by email from info@usedpalletmachinery.com. Your details go only to people who can supply or buy the machine.