PRS
Bandsaw and rotary dismantlers, trim saws and repair tables.
The name identifies the machines. We are not PRS and do not sell for them.
Models you see used

PRS Spartan
- Kind
- Bandsaw dismantler
- Specs
- 10 HP direct drive, 2,200 SFPM, 21 ft 9 in blade; one or two people
- Source
- Pallet Enterprise dismantler guide, July 2025

PRS PROSAW 15, AT, AT-15, XP-TWO
- Kind
- Bandsaw dismantlers
- Specs
- 10 or 15 HP belt drive; XP-TWO is two 15 HP saws with conveyors, one operator
- Source
- Pallet Enterprise dismantler guide, July 2025

PRS Recycler Single / 3-Head
- Kind
- Rotary dismantlers
- Specs
- 3-Head: 15 HP hydraulics, tool steel blades, built-in conveyors
- Source
- Pallet Enterprise dismantler guide, July 2025

PRS OPTIMAX, DUALMAX, AUTOMAX
- Kind
- Trim saws
- Specs
- DUALMAX: two 7-1/2 HP motors, trims up to 66 in; AUTOMAX: five saws, scans and sorts
- Output
- DUALMAX up to 4,000 pieces an hour; AUTOMAX up to 30,000 a shift, maker’s claim
- Source
- Pallet Enterprise trim saw guide, April 2024

PRS Econo / Ergo RS-5460
- Kind
- Repair tables
- Specs
- 3/8 in steel top, 48 x 54 in; Ergo adds back stop and tool rack
- Source
- Pallet Enterprise on the PRS Econo and Ergo tables, June 2013
Photographs show the kind of machine, not the model or a machine we hold. Where the maker publishes no output figure for a model, we leave that line out rather than guess.
Buying or selling a used PRS
PRS covers most of a recycling line by itself. Its Spartan bandsaw dismantler runs a 21 ft 9 in blade at 2,200 SFPM on a 10 HP direct drive, and a factory-rebuilt Spartan was listed in 2025 alongside a new one. The PROSAW range adds belt-driven 10 and 15 HP machines, and the XP-TWO puts two PROSAWs and their conveyors under one operator. The Recycler machines are rotary dismantlers.
On the saw side, the OPTIMAX is a single-end trim saw the guide says has been built for over 30 years, the DUALMAX a double-end saw the maker rates at up to 4,000 pieces an hour, and the AUTOMAX a scan-trim-sort line with five saws rated at up to 30,000 pieces a shift. The Econo and Ergo are plain and ergonomic repair tables.
Because PRS machines are common, parts and know-how are too. On any used PRS dismantler, check guides, wheels and tension; on the trim saws, feed and arbors.
PRS covers a recycling shop from end to end: the dismantlers take pallets apart, the trim saws square the boards, and the Econo and Ergo tables are where the repairs happen. A shop that standardized on PRS can sell a whole line, and a buyer can often take the line as it stood. The PROSAW models come as one- or two-operator machines with fixed or powered table height, which a buyer will ask about.
Selling a used PRS? Send each model from its plate, the motors and phase, blade lengths, and whether the tables come with their tool racks.
The OPTIMAX, DUALMAX and AUTOMAX trim saws show the range: the DUALMAX rated at up to 4,000 pieces an hour and the AUTOMAX at up to 30,000 a shift, by the maker’s figures. A shop that grows from one to the other usually sells the smaller saw, which is how many of them reach start-ups.
The same machines from other makers
- Dismantlers
- Cam-Wood, Smart Products, Industrial Resources, Universal Machinery Sales, Bronco, Alliance Automation
- Trim and chop saws
- Go Fast, Baker, Smart Products, Industrial Resources, Universal Machinery Sales, Pendu, Alliance Automation
- Repair tables
- No other maker of repair tables has a page here yet.