
Band resaws
A band resaw splits cants and thick boards into thinner deck stock with a band blade, so a shop can buy heavier lumber and cut its own deck boards. The only published ask we found is for a new Baker ABX single-head resaw at $25,145; used resaws are usually listed with Request Price.
| Maker and model | Kind | Power | Size and capacity | Maker’s output claim |
|---|---|---|---|---|
| Baker ABX | Single-head band resaw | 95 FPM feed | [1] | |
| Baker Band Double End-Trim | Band trim saw (not a resaw) | Bandsaws in place of circular saws | [2] |
A dash means the maker’s page or the listing gave no figure for that column.
Output figures are the makers’ own claims as the source prints them, not our measurements.
- Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026
- Pallet Enterprise trim saw guide, April 2024, read Nov 15, 2026
Published asks
| Maker and model | Machine | Year and condition | Listed from | Ask |
|---|---|---|---|---|
| Baker ABX | Single head band resaw, 95 FPM feed | 2026, new | Charlotte, NC, Surplus Record | $25,145 |
Asks, not sales: what each seller listed when we read the page on 15 Nov 2026. We are not the seller of these machines, and a listed machine may since have sold.
Who buys a resaw
Resaws belong to shops that build new pallets. Buying 2 inch or thicker lumber or cants and splitting it in house gives you deck boards in the thickness your customer specifies. A recycler working from recovered boards rarely needs one.
A single-head resaw makes one cut a pass; multi-head machines make several. Feed rate is quoted in feet per minute, like the 95 FPM on the Baker ABX listing. If you are planning a new-pallet shop, the resaw sits ahead of the trim saw and the notcher.
Checking a used band resaw
Look at the band wheels and their tires or crowns, the blade guides, the feed rolls or belt and the tensioner. Ask what blade width and tooth it runs, and when the wheels were last dressed. Uneven boards off a resaw usually mean worn guides, a wandering blade or tired feed rolls.
Ask about dust collection, because a resaw makes a lot of sawdust and a used one often comes without its ducting. Send us the cant size you want to split and the board thickness you need, and we will look for a machine that does it.
Setting one up
A band resaw wants lumber fed straight and steadily, so the in-feed and out-feed tables or rolls matter as much as the head. Leave room for full-length cants on both sides. Ask the seller for the blade width it ran, the tensioning method, and spare bands; plan for blade sharpening, whether by your own grinder or a service, from the first week. A new Baker ABX was listed at $25,145 in November 2026, which is a useful ceiling when a used one is offered.