Used machines for pallet shops, by make and model.

Find me a machine
Menu
A long green automatic tandem pallet nailing line with finished pallets stacked at its end

Viking pallet nailing machines

Viking builds bulk-fastener stringer pallet nailing machines, from the one-operator Champion to the three-operator Turbo tandem lines. The maker’s figures run from upwards of 500 pallets a shift on a Champion 304A to upwards of 2,000 on a Turbo 606, and used Champions and older 504s and Duo-Matics turn up in dealer listings, usually with Request Price.

Viking models with the output the maker states
Maker and modelKindPowerSize and capacityMaker’s output claim
Viking Turbo 606Tandem, bulkThree operatorsQuick changeoversupwards of 2,000 a shift[1]
Viking Turbo 505BulkThree operatorsStringer pallets1,800-plus a shift[1]
Viking Express 403Tandem, bulkTwo operatorsTurbo Pro software1,300 a shift[1]
Viking Champion QC306Bulk, quick changeoverOne operatorRecycled and low-grade lumber500 to 600 a shift[1]
Viking Champion 304A ClassicBulkOne operatorRecycled or low-grade lumberupwards of 500 a shift[1]
Viking 504, Champion 305/306, Duo-MaticOlder models in dealer listingsA 1979 Duo-Matic was listed[2]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Pallet Enterprise nailing machine guide, July 2020, read Nov 15, 2026
  2. Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026

Prices

Champion, Express or Turbo

The Champion is the single-operator machine, and it is the Viking a recycler is most likely to buy used: the guide says the QC306 and 304A both handle recycled and low-grade lumber. The Express 403 is the economical tandem for two operators. The Turbo 505 and 606 are the high-volume lines a new-pallet plant runs with three people.

Because they drive bulk nails, a Viking costs more to buy than a collated machine of the same output and less to feed. At high volume that is the point; at a few hundred pallets a day, a collated machine may make more sense. The bulk or collated guide sets out both.

Buying a used Viking

None of the Viking listings we read showed a price. Ask for the model and serial from the nameplate, the year, which hand it is (dealers list left-hand and right-hand Champions separately) and the pallet sizes it is set up for. Ask what has been rebuilt: drivers, nail feeders, hydraulic pumps and valves.

Viking runs its own parts store keyed to each model, which helps an older machine. Note the model and serial before you order; our Viking parts page says what to write down. Viking is named here to identify the machines only.

Selling a Viking

Send the model and serial from the plate, the controls make, the fixtures and the pallet sizes it built. Older Champions, Expresses and Turbos come up in plant closures; their tooling and controls are what buyers weigh. Ask who serviced it. Listings frequently mention rebuilt drivers. Ask about fixtures too.