
Pallet repair tables
A pallet repair table is a heavy steel top with a hold-down or back stop where a repairer pulls broken boards, fits replacements and nails them, with the nail gun hanging overhead. They are simple, so the questions are size, the stop, the tool rig and the air supply, not output figures.
| Maker and model | Kind | Power | Size and capacity | Maker’s output claim |
|---|---|---|---|---|
| PRS Econo | Repair table | 3/8 in steel plate top | 48 x 54 in top, clear 48 x 49 in work area | Hold-down bracket with 4.5 in lip[1] |
| PRS Ergo RS-5460 | Ergonomic repair table | Station plater ready | Back stop and overhead tool rack | Tool balancer, trolley and track optional[1] |
Output figures are the makers’ own claims as the source prints them, not our measurements.
- Pallet Enterprise on the PRS Econo and Ergo tables, June 2013, read Nov 15, 2026
Prices
What a repair station needs
The table itself is the cheap part. A working station also needs a nail gun on a balancer so the repairer is not holding it all day, an air drop and regulator, a bin of replacement boards cut to length, and somewhere for the broken pallets and the finished ones to go. Shops that repair a lot put the tables in a row fed by conveyors; a start-up uses one table and a forklift.
The PRS Econo is the plain version: a 3/8 inch steel top, 48 by 54 inches, with a welded hold-down that leaves a clear 48 by 49 inch work area. The Ergo RS-5460 adds a pallet slide and back stop with an overhead rack for the tools.
Buying used
Check the top for warping and the welds on the stop and legs. Ask whether the overhead rack, balancer and trolley come with it; they often get left behind. Make sure the size fits your pallets: a 48 inch table does not hold a 48 x 48 pallet with room to work.
Repair tables rarely get listed on their own; they come with a shop. If you are closing a shop, see selling a whole line. The recycling line page shows where repair fits.
How many tables
Most shops add tables in step with the dismantler’s board output and the number of people they can put on repairs. Each table needs its own nail gun, a balancer or hose reel, a bin of boards within reach and a path for finished pallets to leave. Used tables are simple steel; check that the top is flat, the stops and hold-downs work, and the welds are whole. A table is one of the cheapest machines in the shop to buy used and one of the easiest to move.
Some shops weld their own tables from plate; a maker’s table with good hold-downs and stops saves that time and usually lasts longer. Look, too, at the overhead tool rack and hose drops. Height-adjustable tables reduce back strain; ergonomic models cost more but keep repairers working longer each day. Lighting overhead helps.