Is pallet recycling profitable?
Pallet recycling can be profitable when a shop gets its cores cheap or free, keeps labor per pallet low, and has machines that match its volume; a shop that pays too much for cores or runs machines far above or below its daily count struggles.

Cores
The used pallet is a recycler’s raw material, and what you pay for it sets the floor of your costs. Shops that collect from warehouses and factories that would otherwise pay to dispose of pallets start with an advantage. Shops that buy cores in a competitive market start with a cost.
Core quality matters as much as price. Good 48 x 40 cores that need a board are fast to turn; broken and odd sizes need dismantling and produce lumber and scrap. Know your mix before you buy machines.
Labor per pallet

Most of the cost of a recycled pallet is somebody’s time. Machines are there to cut minutes per pallet: a dismantler that takes a pallet apart in seconds, a power-feed trim saw instead of a chop saw, a repair table with the gun on a balancer and boards within reach. Makers state their output per operator, for example 600 pallets an 8-hour shift for Smart Products’ one-operator dismantler, and a used machine’s output in its last shop is worth asking about.
Machine output against your count
A machine rated for 1,000 pallets a shift in a shop that does 200 a day ties up money and floor. A machine rated for 400 in a shop that needs 800 means a second shift or a second machine. Matching the machine to the count is where used buying helps: you can buy the right size now and sell it on when you outgrow it. Our Line Planner sets the makers’ output figures beside your daily count, and shows its arithmetic.
What you do with the scrap
Every recycler ends up with broken boards, blocks and offcuts. Hauling them away costs money. Ground into mulch, animal bedding or boiler fuel, they can make some. A shredder that takes whole pallets, nails and all, and pulls the steel out as scrap is how many shops close that loop. Whether it pays depends on your volume and on a local buyer for the product.
What we will not tell you
We do not publish margins, prices for pallets or returns on machines: we have no figures we can source for your market, and we would rather say so. What we can do is help you buy the machines at the right size and sell them when they are no longer the right size. Start with the start-up guide.
Selling what you make
Recycled pallets sell by grade. A clean, sound 48 x 40 that needs nothing goes back out at the best price; a repaired one with a board or two replaced sells for less; combo pallets built from recovered lumber sell to customers who care about price over looks. A shop that sorts its cores carefully, sells each grade to the right customer and keeps the lumber moving does better than one that treats every pallet the same.
Customers matter as much as cores. A recycler with a few steady customers who take the same pallet every week can plan its labor and its machines; one selling load by load to whoever calls cannot.
Trucks and distance
Pallets are bulky for what they are worth, so hauling decides more than people expect. Every mile a trailer of cores travels in and a load of rebuilt pallets travels out comes off the margin. Recyclers near clusters of warehouses and distribution centres have the shortest hauls, which is why so many shops sit beside the big freight corridors. Our state pages show where the warehousing jobs are.
Trailers parked at customers’ docks for cores, a truck that can carry both ways, and routes planned so the truck is rarely empty all count. The machine list matters, but a shop that loses money on trucking will not make it back on the dismantler.
Lumber as a product
Recovered boards can be sold too, cut to length, bundled and strapped, to other builders.
Sources for this guide
Ask about machines that fit your count
Send us your pallets a day and the work you do. We will look for machines rated near your count, not far above it.
Bandsaw dismantler