Used machines for pallet shops, by make and model.

Find me a machine
Menu

Bronco

Air leverage dismantlers and collated nailing systems.

The name identifies the machines. We are not Bronco and do not sell for them.

Models you see used

Leverage dismantler, the kind of machine the Bronco Pallet Systems leverage dismantler is

Bronco Pallet Systems leverage dismantler

Kind
Leverage dismantler
Specs
100 PSI air; safety bar; air couplers for nailers
Output
60 to 80 an hour, 400 to 600 a day, one operator, maker’s claim
Source
Pallet Enterprise dismantler guide, July 2025
Collated nailing system, the kind of machine the Mustang 4000 is

Bronco Mustang 4000

Kind
Collated nailing system
Specs
Optional powered gantry, roll-out and accumulator; coils of 3,000 nails; block and stringer
Source
Pallet Enterprise nailing machine guide, July 2020

Photographs show the kind of machine, not the model or a machine we hold. Where the maker publishes no output figure for a model, we leave that line out rather than guess.

Buying or selling a used Bronco

Bronco is the name most people mean when they say leverage dismantler. Its machine runs on 100 PSI shop air and pries the boards off whole, nails still in, and the maker rates it at 60 to 80 pallets an hour, 400 to 600 a day for one operator. There is no blade, and the guide notes a five-year warranty on parts for new machines.

Bronco also builds collated nailing systems for block and stringer pallets. The Mustang 4000 is the automated one, with an optional powered nailing gantry, power roll-out and accumulator, running coils of 3,000 collated nails. Bronco systems are built for one operator, with a stacker on the back, and custom oversize and skid systems are offered.

Since both machines run on air, the compressor is the first question on a used Bronco: what size, and does it come with the machine. Then the cylinders, valves and hoses.

Bronco’s two machines suit the smallest shops: a leverage dismantler that pries boards off whole, and a collated nailing system for rebuilding with them. Neither needs three-phase. A recycler in a rented building with a good compressor can tear down and rebuild with Bronco machines and nothing else, which is why buyers starting out ask about them by name.

If you are selling one, say what compressor it ran on, the PSI it needs, the condition of the cylinders and valves, and the pallet sizes it handled.

The Mustang 4000 is Bronco’s collated nailing system. Being collated, it runs on coil or strip nails bought for its guns, so a buyer should price the fasteners as well as the machine. The leverage dismantler leaves boards at full thickness, which some customers for rebuilt pallets prefer.

Air tools also mean hoses, couplers, lubricators and filters; ask for them with the machine. A Bronco that sat idle may need its cylinders resealed before work starts. Spare hoses and fittings are cheap; buy them alongside the machine.

Moisture traps, oilers and quick-disconnect fittings keep pneumatic machinery healthy, especially in unheated buildings during cold months.

The same machines from other makers

Dismantlers
Cam-Wood, Smart Products, PRS, Industrial Resources, Universal Machinery Sales, Alliance Automation
Nailing machines
Universal Machinery Sales, Rayco, Corali, Storti