Used machines for pallet shops, by make and model.

Find me a machine
Menu
Nailing heads on the gantry of a pallet nailing machine over pine deck boards

Parts for Viking pallet machines

Parts for a used Viking nailing machine start with its nameplate: the model, serial number and year decide which drivers, feeders and controls fit. Viking runs its own parts store organised by machine model and upgrade kit, and for current machines that is usually the first place to look; we help with older models and with parts from machines taken out of service.

Viking models you see used, and what to note
ModelKindNoteFrom the nameplateOutput, as claimed
Viking Champion QC306, 304ASingle-operator, bulkNote hand: left or rightModel and serial from the plate500 to 600 a shift claimed (QC306)[1]
Viking Champion 305/306Older Champions in listingsNote yearModel and serial from the plate[2]
Viking 504Automatic with stackerNote controls makeModel and serial from the plate[2]
Viking Duo-MaticOne listed was built in 1979Mechanical parts firstModel and serial from the plate[2]
Viking Express 403, Turbo 505, 606Tandem linesPLC and software versionModel and serial from the plate1,300 to 2,000-plus a shift claimed[1]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Pallet Enterprise nailing machine guide, July 2020, read Nov 15, 2026
  2. Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026

Prices

We do not show parts prices.

What to write down before you ask

The model and serial from the nameplate, the year, whether a Champion is left- or right-hand, and the part as the manual names it, with its part number if you have the manual. Photograph the part in place and on the bench. For drivers and nail feeders, note the nail size and type the machine runs.

For controls, note the PLC or relay panel make and model and any software version. Old controls are a common reason Vikings are sold; a control upgrade from a specialist may cost less than chasing obsolete parts.

Parts from machines taken out of service

When a shop retires a Viking, its stations, drivers and fixtures can keep another machine running. If you have one standing idle, the sell page takes it as a machine or for parts. If you need one, send the details above and we will look.

Viking’s models and output figures are on the Viking page. Viking is named to identify machines only; we are not the maker or its agent.

Older machines

An older Viking that has been looked after can run for decades, and many in listings were built long ago; one Duo-Matic was listed as built in 1979. Mechanical parts for old machines are often made or rebuilt by machine shops rather than bought new. Electrical controls are the harder part: if the original controls are obsolete, ask whether the machine was retrofitted and who did it. Viking’s own parts store covers current machines; ask it first, then machine shops for the rest. Photograph the nameplate, every gun and the electrical cabinet before you call anyone. Pneumatic valves, cylinders and seals are standard catalogue items from industrial suppliers. Keep old parts until replacements fit. Label everything.