
Pallet shredders
A low-speed pallet shredder takes whole pallets, nails and all, between slow-turning cutters, and the nails come out with the chips for a magnet to pull as a second product. Cresswood’s XR series, the shredders most often named in the trade press, are rated from 3,000 to 12,000 pounds an hour depending on model and screen.
| Maker and model | Kind | Power | Size and capacity | Maker’s output claim |
|---|---|---|---|---|
| Cresswood XR500 Series | Low-speed shredder | Small footprint, for pallet shops | 3,000 to 5,000 lb an hour[1] | |
| Cresswood XR600 Series | Low-speed shredder | 4,000 to 7,000 lb an hour[1] | ||
| Cresswood XR700 Series | Low-speed shredder | 70 in rotor, 20 in diameter | 6,500 to 10,000 lb an hour[1] | |
| Cresswood XR-2400 Series | Low-speed shredder | By screen size | 8,000 to 12,000 lb an hour[1] | |
| Rotochopper twin-rotor shredders | Twin rotor | 375 to 770 HP | Removes metal before grinding | [1] |
A dash means the maker’s page or the listing gave no figure for that column.
Output figures are the makers’ own claims as the source prints them, not our measurements.
- Pallet Enterprise grinding and shredding guide, March 2026, read Nov 15, 2026
Prices
We have not read a used shredder listing with a published ask yet, so none is shown.
Why pallet shops use shredders
Nails. A shredder turns slowly and has the torque to cut through a pallet with its fasteners in, so you can feed it broken pallets straight off the pile instead of pulling nails or picking out hardware first. The steel comes out in the chips and a magnet pulls it off the belt, and scrap steel is worth something.
The guide calls the XR600 the most popular choice for pallet companies in the US, and the XR500 a small-footprint machine made for pallet manufacturers and recyclers. Output is quoted in pounds an hour and depends on the screen: a finer screen for bedding makes fewer pounds than a coarse one for fuel.
Checking a used shredder
Look at the cutters or teeth and their holders, the shafts and bearings, the screen and the hydraulic or electric drive. Ask for hours, and for how many tons a day it ran. Watch it run on pallets and listen for the reversing cycle when it jams; ask how often it jams on blocks and skids.
Ask which screen sizes come with it and about the magnet and discharge conveyor, which are often separate purchases. The grinder or shredder guide compares shredders with horizontal grinders.
Selling a shredder
Send the model, the screen sizes, the hours and the magnet setup. Ask for a video of it taking a whole pallet. Rotor speed, cutter width and hopper size matter. Ask about amperage draw.