Used machines for pallet shops, by make and model.

Find me a machine
Menu

Grinder or shredder for scrap pallets

For a pallet shop grinding its own scrap, a low-speed shredder is usually the better first machine because it takes whole pallets with their nails and lets a magnet pull the steel; a horizontal grinder makes more product an hour and a more even chip, and suits a yard selling mulch or bedding in volume.

A low-speed shredder taking whole pallets with a magnet over the outfeed belt

The nail question

Pallet scrap is full of nails. A low-speed shredder turns slowly with high torque, cuts through them, and passes the steel out with the wood, where a magnet over the belt takes it off. A horizontal grinder runs fast hammers or teeth against an anvil and screen; steel wears them and can break them. Vecoplan lists integrated tramp metal protection and Rotochopper’s shredders are described as removing metal before grinding, which shows how seriously the trade takes it.

Output and product

A horizontal grinder throwing ground wood onto a pile

Shredders are rated in pounds an hour and the screen decides much of it: Cresswood’s XR500 at 3,000 to 5,000 and its XR-2400 at 8,000 to 12,000, by screen size. Horizontal grinders are bigger machines with hundreds of horsepower, built to make tons of even product an hour. If your aim is to get rid of a scrap pile and sell what you can, a shredder is enough. If your aim is to sell colored mulch or bedding by the truckload, a grinder, and maybe a colorizer, is the tool.

Low-speed shredder and horizontal grinder compared for pallet scrap
PointLow-speed shredderHorizontal grinder
FeedWhole pallets, nails and allWood waste laid flat on an apron; metal is the enemy
MetalComes out with the chips for a magnetNeeds protection or a shredder ahead of it
OutputCresswood XR500: 3,000 to 5,000 lb an hour; XR-2400: 8,000 to 12,000Higher; Rotochopper B-66 E listed at 500 to 1,000 HP
PowerElectric or hydraulic driveDiesel or big three-phase electric
ProductCoarser; screen decidesMore even chip for mulch and bedding
SuitsA pallet shop clearing its scrapA yard selling ground product in volume

Power and space

A small shredder fits inside a pallet shop and runs on the shop’s power; the XR500 is described as a small-footprint machine for pallet makers and recyclers. A horizontal grinder lives outdoors, on diesel or on heavy three-phase service, with a loader feeding it and room for product piles. If you have neither the room nor the power, a shredder is the answer.

Doing both

Bigger yards run a shredder ahead of a grinder: the shredder takes whole pallets and the metal out, the grinder makes the finished product. If you already own a grinder and want to add pallets to its feed, a shredder in front protects it. The machines are on the shredder and horizontal grinder pages.

Buying used

Low-speed shredders are simpler machines with fewer wear points, and a used one in good order can be a straightforward buy. Used horizontal grinders cost more and carry more risk: engine and rotor hours, the condition of the teeth and anvil, and the screens all decide the value. Ask for the hour meter, the service records and a video of it grinding the feed you will use.

Either way, think about the magnet and the conveyors. A shredder or grinder sold without its magnet and discharge belt is a different machine from the one you need for pallets.

What a yard needs around the machine

The grinder or shredder is only part of the setup. A loader or grapple to feed it, conveyors to move the product, a magnet and a bin for the steel, room for product piles and a way to keep dust down all come with it. On a used machine, ask which of those come in the sale; a shredder sold without its discharge conveyor needs one before it does anything useful. Then think about noise and neighbours. Grinding is loud and dusty, and many towns limit when and where it can be done.

Electric, diesel or hydraulic drive

Shredders in pallet shops are mostly electric, some with hydraulic drives that reverse when they jam. Horizontal grinders come in diesel versions for mobile work and electric versions such as Rotochopper’s B-66 E, at 500 to 1,000 HP, for fixed sites. Electric running costs are lower, but the utility service can cost a great deal to bring in.

Permits for outdoor grinding, stormwater rules for mulch piles and fire codes on stockpile height vary by county and state; check them before choosing a site. Neighbours notice smoke too. Visit working yards first, during busy hours. Hearing protection is mandatory.

Machines in this guide, with one model each as the trade guides list it
MachineFor exampleMaker’s figure
Mulch colorizersStand-alone colorizer, Engine or electricNot stated
Pallet shreddersCresswood XR500 Series, Not stated3,000 to 5,000 lb an hour
Horizontal grindersRotochopper B-66 E, 500 to 1,000 HPNot stated

Ask for a grinder or shredder

Tell us what you will feed it, how many tons a day, the product you want and the power you have. We will look for a machine that fits.

Shredder or grinder

What do you need?
Add maker, model and power (optional)

We reply by email from info@usedpalletmachinery.com. Your details go only to people who can supply or buy the machine.