
Woodpecker pallet machines
The Woodpecker and Woodpecker Junior are collated-fastener nailing machines built in Ohio by Midwest Machinery & Automation, for stringer and block pallets, mats and crate sides. Pallet Enterprise’s nailing guide says they have been built since 2001 and that over 300 are working in North America, which is why used ones come up.
| Maker and model | Kind | Power | Size and capacity | Maker’s output claim |
|---|---|---|---|---|
| MMA Woodpecker | Collated | Pneumatic tools | Stringer and block pallets, mats, crate sides | [1] |
| MMA Woodpecker Junior | Collated | Pneumatic tools | Stringer and block pallets, new or recycled lumber | [1] |
| MMA MASTer Recycler | Collated, recycled lumber only | Automatic pallet flipper | Stringer pallets | [1] |
A dash means the maker’s page or the listing gave no figure for that column.
Output figures are the makers’ own claims as the source prints them, not our measurements.
- Pallet Enterprise nailing machine guide, July 2020, read Nov 15, 2026
Prices
What a Woodpecker builds
The guide credits the Woodpecker with stringer and block pallets, mats and crate sides, from new or recycled lumber, all on collated nails. That range is what makes it a common machine for a shop that builds a bit of everything rather than one size all day. The MASTer Recycler from the same maker is set up for stringer pallets built only from recycled lumber, with an automatic flipper.
Being collated, it costs less to buy than a bulk machine and more to feed. Coil nails for its tools are a running cost to price before you decide; the bulk or collated guide goes through it.
Checking a used Woodpecker
Ask whether it is a Woodpecker or a Junior and what year. Count the nailing tools and check their make and series, since replacements need to match. Run it on the sizes you build and look at nail placement on the deck boards. Ask what fixtures come with it for blocks or mats.
We found no published ask for a used Woodpecker in November 2026. Tell us what you build and how many a day, and we will look for one. Other machines are on the nailing machine page and in the nailer checklist.
Who buys a used one
Woodpecker machines are built in Ohio, and small builders across the Midwest and East run them. Buyers are usually shops moving up from hand nailing at tables, so they ask the same questions: which pallet sizes it builds, how many people it takes, what fasteners it shoots and what air it needs. Answer those in your sell request and you have answered most of the calls you would get. The Woodpecker Jr is the smaller machine and the one smaller shops look for; check which you have before you list it.
Before you list or buy one, note the stringer lengths and deck spacing its jig accepts, the gun models mounted on it, and whether the flipper or stacker options were fitted. Those three details answer most questions a builder will ask. Small builders across Indiana, Pennsylvania and Ohio trade them. Check welds, clamps, pins and squaring stops; worn ones produce skewed, racked pallets.