Starting a new-pallet manufacturing shop
A shop that builds new pallets buys lumber and cuts it into parts, so its first machines are a saw for cutting stock to length, a resaw if it buys thick lumber, a notcher and a nailing machine, rather than the dismantler a recycler starts with.

Cut stock: the first job
New pallets start as lumber. Most new-pallet shops either buy cut stock (stringers and deck boards already cut to size) or cut their own. If you cut your own, the machines are a saw to cut length, often a multi-head trim saw such as the Go Fast MET-20 with two to seven heads, and a band resaw if you buy thick lumber or cants and split them into deck boards.
A small shop can start with a chop saw and bought-in cut stock, and add the resaw and multi-head saw when the volume justifies it. The Baker ABX resaw was listed new at $25,145 in November 2026; Pendu’s multi-saw trimmers and complete cut-stock lines also turn up used.
Notching and nailing

A notcher cuts the fork notches into stringers for partial 4-way pallets. A single head machine is enough at first; a double head halves the handling when the nailer starts waiting.
The nailing machine is the biggest decision. Collated machines cost less to buy and more to feed; bulk machines cost more to buy and less to feed. At a few hundred pallets a day, a collated machine such as a Pallet Chief or a Rayco is the usual start. Over a thousand a shift, the bulk tandem lines from Viking and others come into it. Our bulk or collated guide works through the choice.
How it differs from recycling
A recycler’s raw material is free or cheap cores and its machines recover lumber from them. A new-pallet builder pays for lumber and sells precision: the right size, the right notch, the right nail pattern, every time. That shifts money towards saws and nailers with good fixtures, and away from dismantlers and repair tables.
Many shops do both: rebuilding cores and building new pallets for customers who want them. The machines overlap at the notcher and the nailer.
Export and block pallets
If customers ship overseas, the pallets need ISPM 15 treatment, which usually means a heat-treating kiln and enrolment with an ALSC-accredited agency. If they want block pallets, you need a nailer that builds them; see block pallet nailers. Both are covered on our export pallet makers page.
Buying lumber, not cores
A builder’s raw material is lumber, bought by the truckload from sawmills or wholesalers, and its price moves. Recyclers live on cores; builders live on board feet. That changes which machines pay. A resaw lets you buy cheaper thick stock or cants and make your own deck boards. A multi-head trimmer cuts that stock to length faster than any chop saw. Both make sense only once you know your lumber supply and the pallets your customers order week after week.
Some shops do both, building new for customers with strict specifications and rebuilding for the rest. If that is your plan, the recycling guide covers the other half of the floor.
Customers, sizes and setups
New pallets are built to order. A customer’s specification sets the lumber species and grade, the deck board count and thickness, the stringer or block layout, the notches, the nails and whether the pallet must be heat-treated. Every change of size means resetting stops, fixtures and saws. A shop with three steady sizes runs efficiently; one changing size every hour does not, whatever its machines.
That is why builders choose machines around their customer list. A plant building one or two standard sizes in volume can justify an automatic line set up for them. A shop building many sizes in short runs is better served by flexible collated machines and quick-change fixtures.
| Machine | For example | Maker’s figure |
|---|---|---|
| Trim saws | Wood-Mizer PC200, 18 in blade | up to 12,000 boards a shift |
| Band resaws | Baker ABX, Not stated | Not stated |
| Chop saws | Universal Robo-Chop, Not stated | about 2 seconds a cycle |
| Pallet notchers | Cam-Wood 1AM-1150, 10 HP | Not stated |
| Pallet nailing machines | Viking Turbo 606, Three operators | upwards of 2,000 a shift |
| Heat-treating kilns | Millwood EZ-Flo, Electric | 240 pallets an hour heat treating |
| Block pallet nailers | GBN Excalibur II, Not stated | Not stated |
Sources for this guide
Ask for a cut-stock or nailing machine
Tell us the pallets you will build, how many a day, and the lumber you will buy. We will look for the saw, notcher or nailer that fits.
Nailing machine