Used machines for pallet shops, by make and model.

Find me a machine
Menu
Pneumatic nailing tools on a nailing machine gantry fed by collated nail coils

Pallet Chief nailing machines

Pallet Chief nailing machines are collated stringer nailers from a maker whose team is in Alabama, from the Chief I that runs on compressed air alone to the Chief IV with two nailing stations, a flipper and a deluxe stacker. The published asks we found were $50,000 and $50,762 for two 2023 Pallet Chief IV Deluxe Stacker machines, and a dealer listed a 2008 PC-IV and 2022 PC-IIs with Request Price.

Pallet Chief models as the maker and the listings describe them
Maker and modelKindPowerSize and capacityMaker’s output claim
Pallet Chief IEntry modelCompressed air only[1]
Pallet Chief II (PC-II)One-person nailer; listed with stacker[1]
Pallet Chief IIIAutomatic pallet building system110 volts and compressed air[1]
Pallet Chief IV Deluxe StackerTwo nailing stations, flipper, stackerCollated nails or large coils34 to 48 in; stringers 3 to 4 in; boards 1/2 to 1 in3 pallets a minute in a listing[2]
Pallet Chief Block Pallet SystemBlock pallets36 x 30 to 48 x 48 in standard[1]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Pallet Chief's own machine pages, read Nov 15, 2026
  2. Surplus Record listing, Pallet Chief IV Deluxe Stacker, read Nov 15, 2026

Published asks

Pallet Chief nailers: asking prices as listed
Maker and modelMachineYear and conditionListed fromAsk
Pallet Chief IV Deluxe StackerStringer pallet nailer with stacker, 3 pallets a minute in the listing2023, usedUxbridge, ON, Surplus Record$50,000
Pallet Chief IV Deluxe StackerStringer pallet nailer with stacker, bought new in 20232023, usedUxbridge, ON, Surplus Record$50,762

Asks, not sales: what each seller listed when we read the page on 15 Nov 2026. We are not the seller of these machines, and a listed machine may since have sold.

Telling the four apart

The maker’s pages describe the Chief I as its entry machine on compressed air only, and the Chief II as one of the easiest machines in the trade to run. The Chief III is the automatic one, on 110 volts and air. The Chief IV is the most automated in the standard line-up: two nailing stations, a flipper and the deluxe stacker. That 110 volt figure matters to small shops: none of the four needs three-phase, only a compressor big enough for the guns.

The 2023 Chief IV listing we read rates it at 3 pallets a minute and gives the size range: 34 to 48 inches wide and long, stringers 3 to 4 inches high, deck boards 1/2 to 1 inch thick. If you build outside that, it will not do it without changes.

Buying a used Pallet Chief

Ask which model it really is: dealers write PC-II, PCII and Chief 2 for the same thing. Then count the guns, ask what tools and series they are, and ask for the compressor size the seller ran it on. One listing sold two PC-IIs with stackers and compressors together, which is the way to buy them if the compressors are right.

On a Chief IV, work the flipper and stacker through several cycles. Check the fixtures for the sizes you build. The nailer checklist covers the rest; other makers are on the nailing machine page.

Air and power

Pallet Chief’s own pages describe machines that run on compressed air, the bigger ones with 110 volt power as well. Size the compressor for every gun and cylinder on the machine. Ask which model, I to IV, and its year. Spare cylinders help.