Pendu
Multi-saw trimmers and cut-stock lines.
The name identifies the machines. We are not Pendu and do not sell for them.
Models you see used

Pendu multi-saw trimmer
- Kind
- Multi-head trim saw
- Specs
- 3 to 7 saws, 22 in blades, 10, 15 or 20 HP, lengths to 20 ft or longer, cut depth 3/4 to 7-1/2 in
- Output
- 28 to 40 lugs a minute feed, maker’s claim
- Source
- Pallet Enterprise trim saw guide, April 2024

Pendu M4300
- Kind
- Cut-stock machine
- Specs
- On a dealer’s used list, stock-numbered, no price
- Source
- A pallet machinery dealer’s used equipment page

Pendu complete pallet cut-stock line
- Kind
- Cut-stock line
- Specs
- Listed with Request Price
- Source
- Surplus Record, Pallet Nailers and Pallet Equipment
Photographs show the kind of machine, not the model or a machine we hold. Where the maker publishes no output figure for a model, we leave that line out rather than guess.
Buying or selling a used Pendu
Pendu builds the machines that turn lumber into pallet parts. Its multi-saw trimmers run three to seven saws with 22 inch blades on 10, 15 or 20 HP motors, take lengths of 20 feet or longer, cut from 3/4 to 7-1/2 inches deep, and feed at 28 to 40 lugs a minute, with a 30 inch waste conveyor underneath. That is equipment for a new-pallet plant cutting its own stringers and deck boards.
Pendu machines turn up used as single machines and as whole lines. A Pendu M4300 was on a dealer’s used list in November 2026, and a complete Pendu pallet cut-stock line was listed with Request Price on Surplus Record at the same time.
On a used Pendu trimmer, count the saws and check each arbor and motor, the lug chain and its sprockets, and the waste conveyor. On a whole line, ask for the layout and what each machine fed.
Pendu equipment belongs to the cut-stock side of the trade: plants that turn lumber into pallet parts, for their own nailers or to sell to other builders. A multi-saw trimmer cuts many boards to length at once, fed on a lug chain at 28 to 40 lugs a minute by the maker’s figure, and a complete line adds the in-feed, out-feed and stacking around it. Recycling shops rarely need one.
Selling a Pendu? Send the model, the number of saws, the motors, the lug spacing and the lengths it was set up for, with photos of the chain and each saw.
Pendu’s M4300 is a cut-stock machine, and the complete cut-stock line adds the conveyors, stackers and sorting around the saws. A used line is a plant project rather than a machine purchase: drawings, layout and electrical service come first, and the move is usually done by riggers who have handled lines before. Pendu machines are built in Pennsylvania, in the heart of the eastern hardwood pallet trade. Saw arbors, guards and chain tensioners deserve a close look. Lug spacing must match your stock widths. Request videos showing bundles feeding smoothly.