Used machines for pallet shops, by make and model.

Find me a machine
Menu

What it costs to start a pallet business

There is no honest single figure for what it costs to start a pallet business: the machines are the part you can price, and the asks published in November 2026 put a new gas bandsaw dismantler at $8,925 and a new single head notcher at $5,985 to $7,450, with most used machines listed as Request Price.

A three-phase disconnect and breaker panel on the block wall of an empty pallet shop

Why we do not add it up

Any total for “starting a pallet business” hides the choices that matter: new or used, which machines, gas or three-phase, a building you own or one you rent, and how many pallets a day. Two shops with the same machine list can spend very different amounts. So we show what individual machines are published at, with the date and the source, and leave the adding up to you.

Asks are what sellers asked, not what machines sold for. A used machine listed at a price usually sells below it, and most used pallet machines are listed with no price at all: when we read Surplus Record’s pallet category, 36 of the 50 listings on its first page said Request Price.

The old $30,000 figure

A Pallet Enterprise article from 2000 said a recycler could begin with as little as $30,000 of new recycling machinery. People still quote it. It is more than 25 years old, and the asks in the table show that a single new dismantler and a notcher now come close to half of it before a saw, tables, a compressor or a forklift. Use it as history, not a budget.

Published asks for start-up machines, read 15 November 2026 on Surplus Record
MachineMaker #modelConditionAsk
Bandsaw dismantler, gasCam-Wood 1AM-010-2GNew 2026$8,925
Bandsaw dismantler, electricCam-Wood 1AM-010-2New 2026$8,925
Bandsaw dismantlerWood-Mizer dismantlerUsed, barely$10,878
Pallet saw, 30 HPBrewco pallet saw—$2,719
Single head notcherCam-Wood 1AM-1150New 2026$5,985
Single head notcherBaker single headUsed 2024$7,252
Double head notcherCam-Wood 1AM-12502026$15,300
Nailer with stackerPallet Chief IV DeluxeUsed 2023$50,000

The costs that are not machines

Boxes of collated nail coils and a bucket of bulk nails on a shelf beside a nailer

Power is the big hidden one. Many stationary machines want three-phase, and bringing it to a building that has only single-phase can cost more than the machine. Ask your utility before you buy, or look at gas and single-phase models; the Line Planner flags which machines it lists can run on what.

Then moving the machines. Rigging, a truck and wiring at the new site are paid by somebody, and with used machines sold as-is that is usually the buyer. Add compressors for nail guns and leverage dismantlers, blades and notcher teeth, and a forklift.

The same 2000 article said that in most states, equipment used for pallet manufacturing or recycling is exempt from sales tax. Check your own state; the rules vary.

Where used saves the most

Simple, heavy machines with replaceable wear parts are the best used buys: bandsaw dismantlers, chop saws, repair tables, single head notchers. Check the guides, wheels, heads and motors and you know most of what you are buying. Automated nailing lines and robotic dismantlers are the hardest: their value is in controls and tooling that are expensive to move and recommission. Our start-up guide lists what to buy first.

How to price your own list

Write the machines down in the order you will buy them, with the power each needs. For each one, find the published asks for new and used versions and note the dates: the machine pages here show the ones we read. Add rigging, freight, wiring and air for each machine, then a forklift and compressor if you do not have them. That list, with sources, is a budget you can defend to a lender or a partner, which a single figure off the internet is not.

Then decide what can wait. Many shops run for months on a dismantler, a chop saw and two tables before they need anything else, and buy the next machine out of what those earn.

Reading a used ask

An ask tells you what one seller hoped for on one day. Two things move it. Condition: a running machine with records, spares and its guards is worth more than the same model idle for three years in a barn. Location: a machine that needs a flatbed across four states costs you the freight on top. Compare asks only for the same maker, model and power, and note the year each was listed in.

New-machine asks are useful too. When a new Cam-Wood single head notcher is listed at $5,985 to $7,450 and a used one of the same kind is offered at $7,000, you have a reason to ask questions. Our machine pages carry the dated asks we read, so you can make that comparison yourself.

Second-hand tools around the machines

Nail guns, compressors, hose reels, pallet jacks, banding tools and a forklift add up quickly and are usually bought used too. Auctions of closing shops are a common source for them. Insurance, permits and utility deposits arrive before the first sale. Working capital for cores and payroll comes first. Keep receipts organised.

Ask what your machines would cost

Send us the machines you are pricing, used or new, and the power at your building. We will tell you what is published for them, with the source and date.

Bandsaw dismantler

What do you need?
Add maker, model and power (optional)

We reply by email from info@usedpalletmachinery.com. Your details go only to people who can supply or buy the machine.