Used machines for pallet shops, by make and model.

Find me a machine
Menu
Broken pallets riding a conveyor into a low-speed shredder, with a magnet pulling nails off the outfeed belt

Pallet grinders

A pallet grinder turns the pallets and offcuts a shop cannot rebuild into wood fiber for mulch, animal bedding or boiler fuel, and pulls the nails out as scrap steel. Pallet shops use three kinds: low-speed shredders that take whole pallets nails and all, high-speed horizontal grinders for big volumes of wood waste, and tub grinders that are more common in land clearing than in pallet yards.

Grinding machines named in the 2026 grinding guide
Maker and modelKindPowerSize and capacityMaker’s output claim
Cresswood XR500 SeriesLow-speed shredderSmall footprint, for pallet shops3,000 to 5,000 lb an hour[1]
Cresswood XR600 SeriesLow-speed shredder4,000 to 7,000 lb an hour[1]
Rotochopper B-66 EElectric horizontal grinder500 to 1,000 HPScreen change system[1]
Rotochopper twin-rotor shreddersShredder, removes metal before grinding375 to 770 HP[1]
CW Mill HogZilla lineGrinders, 20 standard modelsSelf-propelled, tracked, electric[1]
Vecoplan shreddersTorsion Point rotorsIntegrated tramp metal protection[1]
West Salem Machinery grindersAll-electric grindersElectric[1]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Pallet Enterprise grinding and shredding guide, March 2026, read Nov 15, 2026

Prices

We have not read a used grinder or shredder listing with a published ask that we can show you yet. When we have one, with its source and date, it goes here.

Shredder, horizontal or tub

For a pallet shop the first question is tramp metal. Pallets are full of nails, and a high-speed hammermill does not like steel. A low-speed shredder takes whole pallets and lets the nails come out with the wood for a magnet to pull; Rotochopper’s shredders and Vecoplan’s machines are described as removing or protecting against metal. A horizontal grinder makes more product an hour and a finer, more even chip, and is what mulch producers run.

Tub grinders take bulky, awkward material from above. In a pallet yard they are less common than horizontals. The grinder or shredder guide works through the choice for a small yard.

What to check on any used grinder

Hours on the engine or motor and hours on the rotor since its last rebuild. The rotor, its teeth or hammers and anvils, and the screens. The magnet and the discharge conveyor. On diesel machines, the engine and the clutch; on electric ones, what service it needs, because these motors run to hundreds of horsepower.

Used horizontal grinders are the costliest machines a pallet shop buys used, so get the hours, the maintenance records and a run on your own material if you can. The used grinder page has the full list.

What the product is worth

Before you buy a grinder, know what the ground wood sells for where you are and who takes it: a mulch yard, a bedding customer, a biomass plant, or your own kiln. A grinder that only saves haul-away is a different purchase from one that makes a product. Either way, a magnet to pull out the nails is part of the machine, not an extra.