
Double head pallet notchers
A double head notcher has two cutter heads set at the notch spacing, so a stringer gets both fork notches in a single pass. The published asks we found were $15,300 for a new Cam-Wood 1AM-1250 and $18,129 for a 2025 Go Fast 2NX, both on Surplus Record in November 2026.
| Maker and model | Kind | Power | Size and capacity | Maker’s output claim |
|---|---|---|---|---|
| Cam-Wood 1AM-1250 | Double head | 10 HP, three-phase | Stringer notcher | [1] |
| Go Fast 2NX | Double head | Listed 2025 | [1] |
A dash means the maker’s page or the listing gave no figure for that column.
Output figures are the makers’ own claims as the source prints them, not our measurements.
- Surplus Record, Pallet Nailers and Pallet Equipment, read Nov 15, 2026
Published asks
| Maker and model | Machine | Year and condition | Listed from | Ask |
|---|---|---|---|---|
| Cam-Wood 1AM-1250 | Double head pallet notcher, 10 HP, three-phase | 2026 | Charlotte, NC, Surplus Record | $15,300 |
| Go Fast 2NX | Double head pallet notcher | 2025 | Uxbridge, ON, Surplus Record | $18,129 |
Asks, not sales: what each seller listed when we read the page on 15 Nov 2026. We are not the seller of these machines, and a listed machine may since have sold.
Why shops move up to two heads
Handling. A single head machine needs every stringer fed twice and flipped or turned between passes; a double head machine takes it once. When a nailer is waiting on notched stringers, the second head is usually the cheapest way to keep it fed.
The cost is the machine and the power. The Cam-Wood double head in the listings is three-phase, and a used double head will usually want the same. If your building is single-phase, tell us before we look.
Checking a used double head
Both heads need the same care: teeth, seats, arbor bearings. Then check that the spacing between the heads matches your stringer lengths and that it adjusts if you build more than one size. Run several stringers and measure that both notches land at the same depth and distance from the ends.
Look at the feed system and the fences, and ask how many stringers a shift the shop actually notched. Heads and teeth are on the parts pages; the other notchers are on the notcher page.
Floor space and feed
A double head is longer and heavier than a single, and it wants stringers fed to it steadily: an in-feed table or a short conveyor from the cut-off saw, and a stacking spot at the out-feed. Most run on three-phase; Cam-Wood’s 1AM-1250 is listed as 10 HP three-phase. Count the amps before you count the dollars if your building is small.
Go Fast’s 2NX, listed at $18,129 for a 2025 machine, is the top of the notcher asks we read; Cam-Wood’s new 1AM-1250 was $15,300.
Check that both heads run true, cut the same depth and share a clean, square fence; a double head that cuts mismatched notches makes pallets that rock on the forks. Ask for spare inserts for both heads, and the belts. Dust extraction matters more with two heads throwing chips. Measure overall length first. Vibration, chatter or scorched notches signal trouble.