Rayco
Automated collated stringer nailers.
The name identifies the machines. We are not Rayco and do not sell for them.
Models you see used

Rayco Pallet Pro
- Kind
- Automated collated stringer nailer
- Specs
- One or two operators; stringer feed, automatic flipper and stacking; 3-stringer table; 10 ft outfeed roll table; PLC touch screen
- Output
- 20 to 30 second cycle, maker’s claim
- Source
- Pallet Enterprise nailing machine guide, July 2020

Rayco Edge
- Kind
- Automated collated stringer nailer
- Specs
- One operator; automatic stacking and discharge; nails recycled components
- Output
- about 60 second cycle, maker’s claim
- Source
- Pallet Enterprise nailing machine guide, July 2020
Photographs show the kind of machine, not the model or a machine we hold. Where the maker publishes no output figure for a model, we leave that line out rather than guess.
Buying or selling a used Rayco
Rayco builds two automated stringer nailers that run on collated nails. The Pallet Pro is the faster one: one or two operators, a stringer feed, an automatic flipper and stacking station, a standard three-stringer nailing table and a 10 foot outfeed roll table, with a typical cycle of 20 to 30 seconds by the guide. The Edge is the one-operator machine, with a typical cycle of about 60 seconds, and it can nail pallets built from recycled components.
Both need 70 or 80 Series pneumatic nailing tools, and the gantry nails the deck boards on the fly. On a used Rayco, that is where to start: count the tools, check their series and condition, and ask when they were rebuilt. Then the PLC and touch screen, the flipper and the stacker.
Being collated, a Rayco costs less to buy than a bulk machine and more to feed; the guide to bulk and collated nailers sets out the trade-off.
Rayco builds automated collated stringer nailers, the step between a hand nailing jig and a bulk-fastener line. The Pallet Pro’s 20 to 30 second cycle, by the maker’s figure, puts it at a few hundred pallets a shift, which suits a growing builder or a recycler rebuilding in quantity. A used one is worth asking about when the volume has outgrown hand nailing but not yet a tandem line.
If you are selling a Rayco, send the model, the year, the guns and their condition, the fixtures and the pallet sizes they build.
The Edge runs a longer cycle, about 60 seconds by the maker’s figure, for larger or more complex stringer pallets. Ask a seller of either model for the fixture list and the gun models, because the guns and their collated nails are what you will be buying for years after. Rayco machines suit builders running mid-size volumes of a few repeat stringer sizes. Pneumatic guns, regulators and hoses all wear; budget for rebuild kits during the first year.
Software updates, fixture drawings, spare clamps and the original operator manual all add value when selling; photograph each before listing. Ask how often cycles stalled. Jigs vary; confirm dimensions, deck counts and nail patterns.