What to check on a used pallet nailer
On a used pallet nailing machine, check the nailing tools or drivers, the fixtures for the sizes you build, the flipper and stacker, and the controls, then run a pallet and look at what comes out; a nailer that builds the wrong size is no bargain.

Guns or drivers
On a collated machine, the pneumatic nailing tools do the work. Count them, note their make and series (Rayco machines call for 70 or 80 Series tools, for example), look at the drivers and magazines, and ask when they were last rebuilt. Missing or mismatched tools cost money to replace.
On a bulk machine, the nail feeders and drivers do the work, often on hydraulics. Look at the drivers for wear, the feed tracks for jams, and the hydraulic power unit for leaks. Ask for the nail size it runs.
Fixtures and pallet sizes

A nailer builds what its fixtures hold. Ask which sizes it is set up for, whether the fixtures for each size come with it, and what a changeover takes. The 2023 Pallet Chief IV we read was listed for pallets 34 to 48 inches wide and long, stringers 3 to 4 inches high and deck boards 1/2 to 1 inch thick; anything outside that needs work. If you build block pallets, check that it does; see block pallet nailers.
Flipper and stacker
Automatic flippers and stackers save a person but break in ways a jig does not. Run several pallets through and watch the flip, the transfer and the stack. Listen for air leaks and look at chains and guides. If the stacker is listed separately, as on some Viking and Pallet Chief listings, make sure it is included.
Controls
Ask for the PLC or controller make and model, a backup of its program, the electrical drawings and the manuals. Older controls are a common reason nailers are sold, and the nailing guide lists companies that upgrade controls on any maker’s machine. Check the power: Pallet Chief says its III runs on 110 volts and air, while big tandem lines need three-phase.
Run a pallet
Then build a pallet and look at it: are the nails where they should be, driven flush, not bent over? Is it square? Does the machine keep up the rate the seller says? Ask what it did a shift in its last shop, against the maker’s figure: Viking’s Champion QC306 is rated at 500 to 600 a shift with one operator, for example. The other nailers are on the nailing machine page.
Fasteners and air
Find out exactly which fastener the machine shoots and where you will buy it. Collated nails come in coils or strips for particular gun models; bulk machines need nails of a set length and shank, sorted and fed by the machine. Order a box before the machine arrives. Then check the air: a nailer with several guns needs a compressor sized for all of them firing at once, with a dryer to keep water out of the drivers.
Ask how many people ran it, and in what jobs. A machine that needed three people in the seller’s shop will need three in yours.
Paperwork, programs and parts
Automatic and semi-automatic nailers depend on their controls. Ask for the PLC program backup, the electrical schematics, the manuals and any changes the seller made. A machine whose program is lost can still be saved, but it takes an integrator and time, and that belongs in the price.
Ask what spares come with it: drivers, seals, valves, feeder parts. Ask, too, who serviced it and whether you can call them. A local technician who knows the machine is worth more than most spares.
Safety on the machine
Light curtains, guards, two-hand controls and emergency stops are part of what you are buying. Test every stop. Missing or bypassed safety devices are common on older machines, and putting them back costs money and time before anyone runs pallets. Bring a sample pallet drawing and ask the seller to build it while you watch.
Measure finished pallets: squareness, nail placement, protruding heads and split boards reveal worn fixtures or misaligned guns. Video everything.
| Machine | For example | Maker’s figure |
|---|---|---|
| Block pallet nailers | GBN Excalibur II, Not stated | Not stated |
| Pallet nailing machines | Viking Turbo 606, Three operators | upwards of 2,000 a shift |
Sources for this guide
Ask us for a nailer
Tell us the pallets you build, how many a shift, and whether you want bulk or collated. We will look and put these questions to the seller.
Nailing machine