Used machines for pallet shops, by make and model.

Find me a machine
Menu

Questions pallet shops ask

Plain answers on used pallet machines, with the source where there is a figure.

How many pallets a shift does a dismantler take apart?

It depends on the machine and the crew. In Pallet Enterprise’s 2025 dismantler guide, makers put their bandsaw machines between about 400 pallets a shift (Wood-Mizer’s Pallet Hawg PD200) and 800 to 1,000 (Industrial Resources’ Rapid Cut II). Those are the makers’ figures, not tests. The bandsaw dismantler page lists them model by model.

My building only has single-phase power. What can I run?

More than people expect. Gas machines such as the Pallet Hawg’s gas version and Cam-Wood’s 1AM-010-2G need no grid power. Some electric dismantlers come with a single-phase option, Universal’s Mark I and the Wolverine II among them. Leverage dismantlers and air nailing jigs run on a compressor. The Line Planner sorts what it lists by the power you have.

Should I buy a bulk or a collated nailer?

Bulk-fastener machines feed loose nails and cost more to buy and less to run; collated machines shoot nails in coils or strips and cost less to buy and more to feed. At a few hundred pallets a day collated is usually fine. At a builder’s volume the nail bill decides it. Our nailer guide sets them side by side.

What temperature does a pallet kiln have to reach?

For the ISPM 15 heat-treatment mark, USDA APHIS requires the core of the wood to reach 56 °C and hold it for at least 30 minutes, and the producer to be enrolled with an ALSC-accredited agency. A kiln moved to a new site has to be certified again there; see certifying a used kiln.

Do I pay sales tax on pallet machinery?

A Pallet Enterprise article from 2000 said that in most states, equipment used for pallet manufacturing or recycling is exempt. That is old, the rules vary by state, and they change. Ask your state’s revenue department before you buy, not us.

Are the prices on this site your prices?

No. Every price shown is an asking price a seller published, with the listing it came from and the date we read it. Asks are not what machines sold for. We never put our own prices on the site.

Do you have the machine in stock?

We do not keep a yard of machines. When you ask for one, we look among the shops and sellers who have told us what they have, and the listings we read. Tell us the machine, the power and your ZIP, and we will tell you what we find.

What happens after I send a request?

We read it, and if anything important is missing (the power, a model, where it is) we ask by email. Then we look for the machine, or for a shop that wants yours, and reply by email with what we have.

Why do some pages say “maker’s claim”?

Because it is. Output figures in the trade guides come from the makers, and a shop’s real output depends on its pallets, its crew and its layout. We print the figure with the guide it came from so you can weigh it yourself.