Used machines for pallet shops, by make and model.

Find me a machine
Menu

Cresswood

Low-speed shredders for pallet shops and recyclers.

The name identifies the machines. We are not Cresswood and do not sell for them.

Models you see used

Low-speed shredder, the kind of machine the XR500 Series is

Cresswood XR500 Series

Kind
Low-speed shredder
Specs
Small footprint, made for pallet manufacturers and recyclers; introduced 2020
Output
3,000 to 5,000 lb an hour, maker’s claim
Source
Pallet Enterprise grinding and shredding guide, March 2026
Low-speed shredder, the kind of machine the XR600 Series is

Cresswood XR600 Series

Kind
Low-speed shredder
Specs
Called the most popular choice for US pallet companies
Output
4,000 to 7,000 lb an hour, maker’s claim
Source
Pallet Enterprise grinding and shredding guide, March 2026
Low-speed shredder, the kind of machine the XR700 Series is

Cresswood XR700 Series

Kind
Low-speed shredder
Specs
70 in long rotor, 20 in diameter
Output
6,500 to 10,000 lb an hour, maker’s claim
Source
Pallet Enterprise grinding and shredding guide, March 2026
Low-speed shredder, the kind of machine the XR-2400 Series is

Cresswood XR-2400 Series

Kind
Low-speed shredder
Specs
Output depends on screen size
Output
8,000 to 12,000 lb an hour, maker’s claim
Source
Pallet Enterprise grinding and shredding guide, March 2026

Photographs show the kind of machine, not the model or a machine we hold. Where the maker publishes no output figure for a model, we leave that line out rather than guess.

Buying or selling a used Cresswood

Cresswood, of Cortland, Illinois, builds the low-speed shredders that pallet shops buy to deal with scrap pallets, nails and all. The 2026 grinding guide gives four series, each with an output range that depends on the screen fitted: XR500 at 3,000 to 5,000 pounds an hour, XR600 at 4,000 to 7,000, XR700 at 6,500 to 10,000, and XR-2400 at 8,000 to 12,000. The guide calls the XR600 the most popular choice for pallet companies in the US.

The XR500, introduced in 2020, is the small-footprint machine aimed squarely at pallet manufacturers and recyclers. The XR700’s rotor is 70 inches long and 20 inches across. The guide also lists a North Carolina company building systems around new and rebuilt Cresswood-quality shredders, which is a sign of how many of them are out there.

On a used Cresswood, ask for the series and year, the screen sizes it comes with, the hours, and the condition of the cutters and rotor.

Cresswood’s XR series runs from the XR500, built for the small footprint of a pallet shop, up to the XR-2400 at 8,000 to 12,000 lb an hour by the maker’s figure, with output depending on model and screen. A low-speed shredder takes whole pallets with the nails in, so for many shops it is the only machine needed to turn scrap into a product a buyer will take.

Selling a Cresswood? Send the series and year, the motor and phase, the screens, the hours, and photos of the cutters and the magnet.

Low-speed shredders like these run with high torque and slow cutters, which suits nail-heavy pallet scrap. Screens set the output size, so a seller should list every screen that comes with the machine; a buyer making bedding wants a finer product than one making boiler fuel. Spare cutters, bearings and a hydraulic or drive service record add value to a used one.

Shredder buyers ask about throughput with nails, rotor speed, hopper size and how jams clear; a seller who answers those up front gets serious enquiries. Shredded output also feeds animal bedding mills, compost sites and biomass boilers nearby. Request amperage readings under load.

The same machines from other makers

Shredders and grinders
Rotochopper