Used machines for pallet shops, by make and model.

Find me a machine
Menu
A horizontal grinder throwing ground wood onto a pile under an overcast sky

Vermeer horizontal grinders

Vermeer builds the HG range of horizontal grinders, with the HG4000 rated at 536 HP and the HG6000 at 772 HP gross in its June 2026 literature, each also offered as an electric E model and a tracked TX model. We name Vermeer to identify machines only; we are not a Vermeer dealer, and we show no Vermeer prices.

Vermeer grinders in the maker’s own literature
Maker and modelKindPowerSize and capacityMaker’s output claim
Vermeer HG4000Horizontal grinder536 HP grossMid-size production[1]
Vermeer HG4000EElectric horizontal grinderElectricStationary[1]
Vermeer HG4000TXTracked horizontal grinderDieselMid-size production[1]
Vermeer HG6000Horizontal grinder772 HP grossHigh production[1]
Vermeer HG6000EElectric horizontal grinderElectricFor fixed processing[1]
Vermeer TG5000, TG7000Tub grindersE versions listed[2]

A dash means the maker’s page or the listing gave no figure for that column.

Output figures are the makers’ own claims as the source prints them, not our measurements.

  1. Vermeer horizontal grinder literature, June 2026, read Nov 15, 2026
  2. Vermeer, choosing a tub or horizontal grinder, read Nov 15, 2026

Prices

No Vermeer asks are shown: the prices we came across were search summaries, not listings we read.

Reading a Vermeer model number

HG is horizontal grinder; the number is the size class. An E on the end means electric, for a fixed site with the power to run it; TX means tracked. A pallet yard grinding at one site every day is the classic home for an HG4000E or HG6000E. A contract grinder moving between jobs wants a TX.

Older and smaller HG models still change hands, and Vermeer’s own guide lists TG tub grinders too. Ask a seller for the exact model and year from the plate before comparing.

What to check on a used HG

Engine hours and rotor hours, the condition of the teeth and the anvil, the screens that come with it, the feed system, the discharge conveyor and any magnet. On an E model, ask what motor starter and service it ran on and whether the electrical gear is included. On a TX, the undercarriage.

Compare it with Morbark’s machines, and read the horizontal grinder page for the checks that apply to every make.

What to send if you are selling one

Send the full HG model number, with any letter after it, the serial, the engine or motor and its hours, the rotor and its last rebuild, and the screens on hand. Say whether it has the tracks or the towable chassis, and whether it ran on pallets, green waste or both; pallet feed is hard on teeth and screens, and buyers ask.

Vermeer grinders are built in Pella, Iowa, and a big dealer network means used ones are traded often. Electric HG models suit fixed sites with heavy power; diesel and tracked versions suit contractors who move between jobs.

Buyers often ask whether a used HG has the dealer’s service history; ask the selling dealer, or the dealer nearest the seller, for the work orders on that serial number.

Tracked units climb onto lowboys under their own power; towable ones need a fifth-wheel tractor. Either way, measure width and height against your route’s bridges and permits.